Eddy™ Serial V2.0

Serial to Ethernet Embedded Module

Main Features

•  32-bit ARM9 CPU / 4MB Flash / 32MB SDRAM

•  10/100Mbps Ethernet Port

•  RS232 or RS422/485 Serial Interface

•  Max Serial Communication Speed : 921.6Kbps

•  Pin Header / DB9 interface

•   Supported by Dev Kit including SDK & API

•   Operated by Real Time Linux, Lemonix™â„ƒ

•   Supported by Eclipse based IDE, LemonIDE™

•   Provides easy-to-use Windows utilities

  - COMPort Redirector, PortView™, TestView™

•  Operating Temp : -40 ~ 85°C

Eddy Serial to Ethernet modules are embedded device servers..

Eddy modules mounted on the Development Kit Board

The best embedded solution foryour customized application !

Eddys are distinguished with other embedded device servers in that it can upload and execute user’s customized applications. With least amount of effort, developers can upload any socket / serial communication application that was desinged on standard Linux environment with no or little modification.

Industry’s Most Powerful Specs

Tired of constraints on your embedded device server’s 8-bit CPU and 256KB memory? Eddy provides a simple and complete relief to these concerns by adopting a 32-bit ARM9 CPU with 180MHz clock, 4MB Flash memory, and 32MB SDRAM.

Real Time Linux – Lemonix™

Lemonix is a Real Time Linux built on Linux kernel 2.6.x. Real time scheduler, preemptive kernel and lock-break methods have been implemented on Lemonix to guarantee a maximum response latency of under 100us enabling a stable and reliable means of real time communication.

SDK, API & Source Codes Support

Eddy is distinguished with other embedded device servers in that it can upload and execute customized user applications.

Eclipse based IDE – LemonIDE™ Support

LemonIDE is an integrated development environment built on open source Eclipse framework. LemonIDE provides an easy & effective GUI (Graphical User Interface) for Application and Firmware Developments that runs on SystemBase’s embedded real time Linux, Lemonix

Development Kit

Eddy Development Kit provides an easy testing and evaluation environment for Eddy applications. Before integrating Eddy to user’s hardware, applications are first programmed and tested on the development board. Power, Ready, Communication Interface, and GPIO Serial Signal Status LEDs on the development board provides a visual guide in understanding Eddy’s operating status.

Windows Utility Support

High featured and easy-to-use utilities to monitor and test your finalized products over network and serial interface are provided at no cost.

Eddy-S1/PIN

Eddy-S1/DB9

Eddy-S1/DB9-PoE

Eddy™ Development Kit

Eddy™ Serial to Ethernet Modules Specifications

		S1/Pin	S1/Pin-C	S1/DB9	S1/DB9-C	S1/DB9 -PoE	S1/DB9 -PoE-C
H/W	CPU	ARM926EJ-S (180MHz)
	Memory	4MB Flash / 32 MB SDRAM
	LED	None		Ready, DATA		Tx, Rx, Ready, Power
	GPIO	4		N/A
	Power Input	3.3V ~ 5V Pin Input		5V Power Jack		5V Power Jack or PoE
	Power Consumption	5V / 290 mA (1.5 W Max)
	Dimensions	60 x 42 x 16 mm		62 x 45 x 19 mm		75 x 50 x 19 mm
	Weight	18.8 g		28.65 g		44.50 g
S/W	Operating System	Real Time Linux Lemonix (Kernel 2.6.x)
	Mgmt. Tools	SNMP, Portview, Web
	Terminal	Telnet, SSH
	Application Upload	TFTP, FTP, Web
	Web Service	Embedded Web Server
Serial	Serial Interface	RS232	RS422/485	RS232	RS422/485	RS232	RS422/485
	Serial Port	1 x Pin Header		1 x DB9
	Serial Speed	150 ~ 921.6 Kbps
	Signals	TX, RX, DTR, DSR, CTS, RTS, DCD
	Data Bits	5, 6, 7, 8
	Stop Bits	1, 2
	Parity	None, Even, Odd
	Flow Control	RTS/CTS, Xon/Xoff
Network	Ethernet Interface	10/100 BASE-T (Auto MDIX)
	Ethernet Port	RJ45
	Connection Type	Static IP, DHCP
	Protocol	TCP, UDP, Telnet, SSH, SSL/TLS, DDNS, ICMP, DHCP, TFTP, HTTP, SNMP 1 & 2
Environ-mental	Operating Temp	-40 ~ 85°C
	Storage Temp	-60 ~ 150ËšC
	Humidity	5 ~ 95% Non-Condensing
Programming		Support
Approvals		CE Class A, FCC Class A, RoHS compliant

Eddy™ Development Kit Specifications

Ordering Information

Package